Tuttnauer Elara 11 Class B Pre and Post Vacuum Sales and Service- 508-735-4817

Class B Sterilization Cycles
Pre-vacuum phase efficiently removes air, resulting in the full penetration of steam into wrapped, porous and hollow loads. The post-vacuum
drying phase ensures complete drying of wrapped porous loads and hollow instruments. This guarantees that even the most difficult loads will
easily reach Sterility Assurance Level (SAL).
The Elara11 offers a total of 7 programs: 5 cycle times and 2 test programs, which are the Bowie Dick Test, and the Vacuum Test.
Available Program Instruments and Materials Sterilization Temp Drying Time Average Cycle Time
Flash 273 Unwrapped Instruments 273°F (134°C) 1 Min. 15 Min.
Wdry 273 Wrapped, Porous and Hollow A 273°F (134°C) 20 Min. 42 Min.
No Dry 250 Unwrapped Instruments 250°F (121°C) - 35 Min.
Wdry 250 Porous Wrapped and Hollow A 250°F (121°C) 20 Min. 60 Min.
Delicate 250 Porous Wrapped and Hollow A 250°F (121°C) - 45 Min.
Safety is Our Top Priority
Safety Features:
• 316L grade stainless steel chamber and door with electro-polish
finish
• A cycle will not start unless the door is properly locked
• Automated double locking safety device prevents door from opening
while chamber is pressurized
• Automatic safety shutoff prevents overheating of chamber and load
• Two independent clean water level indicators: A digital alert and a
visual indicator
• A water level alert indicates when waste water reservoir should be
emptied
• Audible signal indicates if cycle is not properly completed
Specifications Elara11
Chamber Dimensions 11 inches (280mm) x 19.8 inches (504mm)
Chamber Volume 7.5 gal (28.5L)
Number of Trays 5
Tray Dimensions WxHxD 6.7 inches (170mm) X 0.8 inches (20mm) X 16.3 inches (415mm)
Voltage (V) Freq. (Hz.) 1ph 230V 50/60 Hz*
Current (A) Power (W) 10A 2300W
Overall Dimensions WxHxD 20.8 inches (530mm) X 17.4 inches (444mm) X 25.4 inches (645mm)
Shipping Weight 184 Pounds (84 kg) (actual device weight is 148 pounds)
Freight Only- unit is too heavy for UPS Ground Delivery
Warranty 1 year, parts and labor
0 Psi
23 Ing
30 Psi
Air Removal Sterilization Drying
Time
Heating Exhaust
Pressure
Temp
Elara - Program Wdry 273
* Requires a voltage between 220V and 235V for proper operation. When applicable a buck/boost transformer (0.5KVA) may be required.
Control Panel
The Elara11’s smart and intuitive control panel uses advanced micro-processor technology with increased memory for consistent and reliable
performance. The control system is fully configurable and stores information from the last 40 cycles.
Control Made Simple
The control panel is easy to operate. The fully automated, menudriven
panel was consolidated into a 3 button circle. This allows
the user to easily select programs or set the autoclave.
Printer
The Elara11 comes equipped with a conveniently located built
in printer. This eliminates the need for an external device or
additional connections, which saves you money. The Built-in
Printer prints detailed cycle progress information and can print
the history of the last 40 cycles.
Cycle Data at a Single Glance
The large 128 x 64 line, graphical LCD screen is easy to read.
The screen is divided into 3 display areas that group information
by categories:
Detailed Cycle Data
Autoclave Status Information
Cycle progress is displayed on the screen in a graph
User Alerts, Messages, Clock and Counter
LTR330-0010/ELA/USA/11.09
0344
The Elara11 meets established International standards and specifications:
USA Standards: ANSI/ AAMI ST55, ASME Sec. Vlll, UL 61010A-1, UL 61010A-2-041, FDA 510(K)
Cleared, ISO 17665-1.The Quality System complies with ISO 13485:2003 and ISO 9001:2008
Canada Standards: CRN, CSA
EU Standards: EN 13060:2004, EN 13445, EN 61010-1, EN 61010-2-041, EN 61010-2-040,
EN 554 EN 61326 EN 61326.Complying with MDD 93/42, PED 97/23, RoHS & WEEE Directives.

Tuttnauer Autoclave Store- We deliver and set-up your new Elara 11 autoclave. You will want this unit installed and validated by an authourized dealer per your owners manual to validate the warranty. For questions please call Kevin at 508-735-4817